G2 Goldfields Inc. announced additional drilling results from the OKO/AREMU project, region 7, Guyana. Drilling has continued to focus on the OKO deformation zone (ODZ), where the Company announced the discovery of high-grade gold mineralization. Drill holes OKD - 1 through OKD - 9 outlined an initial strike length of approximately 700 metres as defined by hole OKD - 5 to the south (8.2 m @ 9.1 g/t Au) and OKD - 9 to the north (2.3 m @ 7.8 g/t Au). Recent drilling has been able to extend the strike length of mineralization at the ODZ a further four hundred meters to 1.1 km. Drill holes OKD - 10 through 12 were successful in establishing additional mineralization to the north with holes OKD - 10 returning 19.5 m @ 2.0 g/t Au including 3.5m @ 6.7 g/t Au. Mineralization at the ODZ continues to remain open to the north and south. Reconnaissance holes were also drilled 100 m to the ESE of this new area with hole OKD - 14 returning 3 m @ 4.2 g/t Au. Additionally, a single hole was drilled 350 m west of holes OKD - 10 through 12 which returned 3 m @ 5.0 g/t Au. Collectively holes OKD - 10 through 15 explored an east west area approximately 600 m long forming a "T" above the ODZ. G2 also drilled in three holes OKD - 17 through 19 in the central part of ODZ. Of particular note was hole OKD - 17 which returned 1.4 m @ 8 g/t Au as well as 4.1m @ 12.9 g/t Au. Drilling to date has outlined numerous high-grade gold intersections along the 1.1 km long ODZ. The highest grades discovered to date lie within the area bounded by 704200 to 704600. Highlights of high- grade holes drilled in 2019 in this area include: Hole OKD - 1 6.0 m @ 15.8 g/t Au; OKD - 7 2.7 m @ 15.8 g/t Au and 1.7 m @ 30.8 g/t Au; OKD - 3 12.0 m @ 13.8 g/t Au; OKD - 17 1.4 m @ 8.0 g/t Au and 4.1 m @ 12.9 g/t Au; OKD - 5 8.2m @ 9.1 g/t Au. 2020 Drill Program: Drilling is expected to commence mid January and will focus on Further defining and expanding known gold mineralization, Additional exploration north and south along strike of the ODZ, Regional exploration work at the Aremu and Tracy exploration targets. QA/QC: Drill core is logged and sampled in a secure core storage facility located on the Oko project site, Guyana. Core samples from the program are cut in half, using a diamond cutting saw, and are sent to MS Analytical Guyana, in Georgetown, Guyana, which is an accredited mineral analysis laboratory, for analysis. All samples are analysed for gold using standard Fire Assay-AA (atomic absorption) techniques. Samples returning over 10.0 g/t gold are analyzed utilizing standard fire assay gravimetric methods. Certified gold reference standards, blanks and field duplicates are routinely inserted into the sample stream, as part of G2 Goldfield's quality control/quality assurance program (QAQC). No QA/QC issues were noted with the results reported herein.