DGAP-News: Siltronic AG / Key word(s): Quarterly / Interim Statement
Siltronic AG reports strong Q3 business development - Production of 300 mm and 200 mm wafers has already been fully loaded for five consecutive quarters - Q3 sales up 9 percent on previous quarter - Q3 EBITDA up 46 percent on previous quarter - Q3 EBITDA margin of 35 percent - Forecast raised slightly Munich, Germany, October 26, 2017 - Following a positive H1, Siltronic AG (TecDAX: WAF) continues to report on strong business performance in Q3 2017. As production of 300 mm and 200 mm wafers has already been fully loaded since Q3 2016 and is also close to being fully loaded for 150 mm and smaller diameter wafers, volume increases in terms of wafer area were barely possible in Q3. "Q3 2017 proved to be strong, as we expected. Wafer demand remains at an undiminished high level. We further increased our operational excellence and marginally raised our production volumes. We achieved additional price increases for 200 mm and 300 mm wafers in Q3. Average US dollar selling prices for 300 mm wafers in Q4 2017 will be up by around 30 percent compared to Q4 2016. Based on these developments, we have decided to increase our capacity in 300 mm wafers by around 70,000 wafers per month by mid-2019," notes Dr. Christoph von Plotho, CEO of Siltronic AG. Q1-Q3 sales growth driven by marked price increases and very high wafer area
The company's sales increased to EUR 308.1 million in Q3 2017, up 9 percent compared with the previous quarter (Q2/2017: EUR 283.1 million). At 1.17 to the euro in Q3 2017, the US dollar traded 7 percent weaker on average than in Q2 at 1.10. However, further increases in average selling prices more than offset this effect, making a strong contribution to the positive sales trend. Sales in the January to September 2017 period were up by 24 percent year-on-year, reflecting rising average selling prices and a higher level of wafer area sold. The US dollar averaged 1.11 between January and September 2017, compared with an average of 1.12 in the previous year's equivalent period. The year-on-year trend in the euro exchange rate to the US dollar consequently had no significant impact. Gross profit more than doubled
Cost of sales was down by 3 percent, from EUR 204.5 million in Q2 to EUR 197.8 million in Q3. The EUR 32.0 million increase in cost of sales in the first nine months of 2017 versus 2016 were mainly due to higher sales volumes as well as performance-related personnel expenses. Cost of sales per wafer area, however, have dropped thanks to the successful cost cutting programs. At EUR 110.3 million, Q3 2017 gross profit had improved by 40 percent over Q2 2017 (EUR 78.6 million). The gross margin rose from 27.8 percent in Q2 2017 to 35.8 percent in Q3. Gross profit in the January to September 2017 period of EUR 248.3 million more than doubled compared with the first nine months of 2016. The gross profit margin increased from 17.2 percent to 29.2 percent. Selling selling, R&D and general administration expenses slightly up
Selling expenses, R&D and general administration expenses of EUR 32.2 million in Q3 were at the previous quarter's level (Q2/2017: EUR 32.6 million).
In a comparison of the nine-month period, selling expenses, R&D and general administration expenses in 2017 rose compared with 2016 especially due to performance-related personnel expenses.
In Q3 2017, the company generated EUR 2.5 million of income from exchange rate effects (Q2/2017: expenses of EUR -2.7 million). On a cumulative basis for the nine-month period, Siltronic recorded an expense of EUR -4.7 million from exchange rate effects which was considerably lower than during the first nine months of 2016 (Q1-Q3/2016: EUR -19.4 million). Very positive trend in EBIT and EBITDA margins
In Q3 2017, the company generated earnings before interest and tax (EBIT) of EUR 77.8 million, representing an increase of 79 percent compared with Q2 (Q2/2017: EUR 43.4 million). EBIT margin was 25.2 percent, compared with 15.3 percent in the previous quarter. In the January to September 2017 period, EBIT improved by EUR 137.6 million over the 2016 equivalent period. EBIT margin was 17.0 percent, compared with 1.0 percent in Q1-Q3 2016. Earnings before interest, tax, depreciation and amortization (EBITDA) amounted to EUR 106.5 million in Q3, reflecting 46 percent growth compared with Q2 (Q2/2017: EUR 72.7 million). The EBITDA margin reached 34.6 percent (Q2/2017: 25.7 percent). During the first nine months of 2017, EBITDA rose to EUR 232.2 million (Q1-Q3/2016: EUR 95.5 million). The EBITDA margin increased from 13.9 percent to 27.3 percent. Result for the period and result per share increased
Net profit in Q3 2017 of EUR 66.0 million almost represented a doubling compared with Q2 (EUR 35.2 million), primarily thanks to higher prices. Earnings per share amounted to EUR 2.12 in Q3 compared with EUR 1.13 in the previous quarter. Profit for the first nine months of 2017 was EUR 118.3 million. In a comparison with the previous year's reporting period, this chiefly reflects price increases and higher wafer area sold. Profit per common share in Q1-Q3 2017 amounted to EUR 3.81 (Q1-Q3 2016: EUR -0.12). The clear improvement in EBIT had a positive effect on ROCE (Return on Capital Employed), which was up from 24.0 percent in Q2 to 43.4 percent in Q3. In the January to September 2017 period, ROCE amounted to 26.7 percent, compared with 1.3 percent in Q1-Q3 2016. Equity increased thanks to positive results and higher interest rates on pensions
The EUR 163.0 million rise in equity is mainly attributable to the results for the period of EUR 118.3 million and slightly higher discount rates for pension provisions. Higher interest rates for the evaluation of pension provisions led to a reduction in non-current liabilities. The pension provision in Germany was discounted applying a 2.21 percent interest rate as of September 30, 2017, compared with 1.94 percent as of December 31, 2016. In the USA, the interest rate for pensions was down from 3.92 percent of the end of December 2016 to 3.61 percent as of the end of September 2017. Strong free cash flow
Capital expenditure on property, plant and equipment and on intangible assets amounted to EUR 61.7 million during the first nine months of 2017 and relate primarily to the replacement of crystal pullers in Freiberg as well as the further automation of production in Germany. Payments for investments in property, plant and equipment and intangible assets amounted to EUR 60.3 million. Cash flow from operating activities includes EUR 17.3 million of prepayments from customers. These prepayments are utilized for necessary investments in production systems for leading-edge technology, thereby improving the product mix. Siltronic's total capacity remains unchanged. Thanks to the strong earnings generated in the period under review, free cash flow stood at EUR 58.2 million in Q3 2017 (Q2/2017: EUR 41.8 million). In the first nine months of 2017, free cash flow totaled EUR 131.4 million, compared with EUR 9.1 million in the previous year's equivalent period. Net financial assets reach EUR 294.8 million
Net financial assets amounted to EUR 294.8 million as of September 30, 2017, thanks to the high level of free cash flow. Liquid assets of EUR 281.0 million account for the largest share. Siltronic slightly raises 2017 forecast and now expects sales of at least EUR 1.16 billion and an EBITDA margin of at least 29 percent "Wafer prices improved nicely year to date. We also expect more price hikes in Q4, but anticipate a slower rate than in previous quarters," remarks von Plotho. "We have successfully negotiated long-term contracts with some customers that are set to start in 2018 and 2019. We expect to receive the relevant prepayments from these customers in 2017 and 2018." Siltronic is slightly adjusting its forecast for the full financial year 2017 and now expects sales of at least EUR 1.16 billion and an EBITDA margin of at least 29 percent. Investments will prove somewhat higher than originally planned. "We will be making prepayments for new production equipment already in 2017. As a result, our capex will grow to around EUR 120 million this year," as Rainer Irle, CFO of Siltronic AG explains. Due to continued high demand and short supply, maximizing output within the scope of existing production capacities continues to be the top priority at Siltronic. Overview of forecast adjustment
Conference call for analysts and investors The Executive Board of Siltronic AG will conduct a conference call with analysts and investors (in English only) on October 26, 2017 at 3:00 pm (CEST). This call will be streamed via the Internet. The audio webcast will be available live as well as on demand on Siltronic's website. The latest investor presentation (in English only), this press release and an Excel file with the most important key figures are also published on the Siltronic website. Contact:
Petra Müller Company profile: Siltronic is one of the world's largest manufacturers of hyperpure silicon wafers and partner to many leading semiconductor companies. The company operates production sites in Asia, Europe and the USA. Siltronic develops and manufactures silicon wafers in diameters of up to 300mm. Silicon wafers form the basis for modern microelectronics and nanoelectronics and are a key component in semiconductor chips driving computers, smartphones, navigation systems and many other applications.
This press release includes - in the applicable financial reporting framework not clearly defined - supplemental financial measures that are or may be alternative performance measures (non-GAAP- measures). These supplemental financial measures should not be viewed in isolation or as an alternative to measures of Siltronic's net assets and financial positions or results of operations as presented in accordance with the applicable financial reporting framework in its Consolidated Financial Statements. Other companies that report or describe similarly titled alternative performance measures may calculate them differently. Explanations of financial measures used can be found in the Annual Report of Siltronic AG. Due to rounding, numbers presented throughout this press release and other reports may not add up precisely to the totals provided and percentages may not precisely reflect the absolute figures. This press release is a Quarterly Group Statement according to the Frankfurt Stock Exchange's stock exchange regulation 50.
26.10.2017 Dissemination of a Corporate News, transmitted by DGAP - a service of EQS Group AG. |
Language: | English |
Company: | Siltronic AG |
Hanns-Seidel-Platz 4 | |
81737 Munich | |
Germany | |
Phone: | +49 89 8564 3133 |
Fax: | +49 89 8564-3904 |
E-mail: | investor.relations@siltronic.com |
Internet: | www.siltronic.com |
ISIN: | DE000WAF3001 |
WKN: | WAF300 |
Indices: | TecDAX |
Listed: | Regulated Market in Frankfurt (Prime Standard); Regulated Unofficial Market in Berlin, Dusseldorf, Stuttgart, Tradegate Exchange |
End of News | DGAP News Service |
622589 26.10.2017