Ethos Gold Corp. announced drill results from the Company's first reconnaissance, wide-spaced drill program at the Perk- Rocky Copper-Gold Porphyry Project ("Perk-Rocky") 200 kilometres west of Williams Lake. Perk-Rocky contains an extensive 8 by 5-kilometer highly prospective porphyry-style alteration footprint that contains widespread copper sulphides at surface and may be related to one or more porphyry centers. This program is the first time the property has ever been drill-tested. PK21-01, located near the head of Chromium Creek, approximately 100 m south of the Briton hematite showing, intersected moderate to strong advanced argillic (pyrophyllite-topaz-dickite-tourmaline-pyrite- hematite) alteration from 5.6 m (start of core) to 101.9 m where the altered zone is in fault contact with fresher, chlorite-epidote altered volcaniclastic rocks of the Upper Triassic Mosley Formation. The advanced argillic alteration is consistent through this interval except where cut by post-alteration mafic dykes or sills. The hole stayed in variably chlorite-epidote altered volcanic flows and volcaniclastic rocks to termination. Significant Cu and Au results are summarized in Table 1; however, the strongest Cu results of 1180 pm (157.5 - 158.1 m) and 762 ppm Cu (185.3- 185.8 m) are associated with narrow quartz-carbonate-epidote veins located in the less altered volcanic rocks. PK21-02 was collared from the same setup as PK21-01 and drilled to the south at -65° and to a depth of 235 m. The hole intersected the same moderate to strong advanced argillic alteration assemblage to a depth of 172 m. However, modest alteration comprising carbonate- kaolinite-chlorite dominated from 8 m to 50 m and truncated by mafic dykes or sills from approximately 98 m to 150 m. The alteration is in fault contact with less altered, chlorite-epidote altered Upper Triassic Mosley Formation volcaniclastic rocks at approximately 178 m which persist to the bottom of the hole. Anomalous Cu results include 170 ppm Cu between 11-25 m and is associated with limonitic, sheared volcanic rocks. PK21-03 was collared 2.7 km east-northeast of PK21-01 and drilled to the north to cut an untested, historic IP chargeability anomaly. From top of the hole to approximately 109 m, the hole intersected strongly broken and sheared, sericite-pyrite altered volcanic rocks with a zone of moderate advanced argillic (pyrophyllite-dickite-tourmaline-pyrite) alteration from 36 m to 48 m. The historic chargeability anomaly is believed to be caused by the strongly pyritic rocks above 109 m. Significant Cu in this hole is 581 ppm from 231.65 m to 232.08 m in a bleached and sheared mafic dyke. A 2 m sample from 22.4 m in gouged, sheared volcanic rocks assayed 121 g/t Ag with no other associated metals except 180 ppm Cu. The highest Mo value from the project to date (120 ppm) was returned from 9 m to 11 m in broken, quartz-veined volcanic rocks. PK21-04 is located 765 m east of PK21-03 and was drilled to the north to a depth of 309 m to test an area of copper-bearing float samples (proximal to the PIN 2 showing) and to test the depth of widespread phyllic alteration. From the top of the hole to approximately 104 m, the drill hole intersected a sequence of weakly chlorite-clay-carbonate-pyrite altered volcaniclastic rocks (Mosley Formation). The core is moderately to strongly fractured and sheared from 104 m to approximately 220 m with moderate to strong sericite-clay-chlorite-pyrite alteration. Within this interval, from 154 m to 172 m, is a zone of moderate to strong advanced argillic alteration (pyrophyllite-topaz-kaolinite-dickite-pyrite). The bottom of the hole (220 m to 309 m) is more competent, green and maroon Mosley Formation volcaniclastic units. Significant anomalous Cu was intersected between 133 and 158.60 m returning 135 ppm Cu in sericite- pyrite altered volcanic rocks. PK21-05 is located 2.8 km west-southwest of PK21-01 and was drilled to the north to a depth of 415 m to test copper mineralization identified in 2020 along the nearby ridge crest. The hole intersected a meta-diorite from 23.6 m to 89 m and generally weakly altered, competent hornfelsed volcaniclastic rocks from 89 m to 158 m. From 158 m to approximately 199 m, the core is strongly sheared and fractured within a fault zone. From 199 m to the end of the hole at 415 m, the core is more competent, chlorite-epidote altered hornfelsed volcanic units which are locally bleached. Two significant samples occur within the meta-diorite: 1.62 g/t Au (with 1.69 g/t Te) from 62 m to 63.15 m and 586 Cu from 79.55 m to 81 m. The gold value is associated with some quartz veining at the margin of porphyritic dyke and the copper value with a narrow zone of silicification. Additional anomalous Cu intervals occur between 37-174.25 m and 327.32-353.58 m returning 113 and 120 ppm Cu respectively. PK21-06 was collared 200 m south of PK21-01 and drill to the southwest at -70° to a depth of 437.7 m. The hole was planned to test the advanced argillic alteration identified in PK21-01 and 02 and to better delineate the geology. PK21-06 intersected moderate to strong advanced argillic alteration (pyrophyllite- topaz-kaolinite-tourmaline-pyrite) from surface to a down-hole depth of 178 m. The advanced argillic alteration is locally strongly sheared and foliated with up to 20% pyrite and is cut by a post-alteration mafic dyke or sill from 32.2 m to 47.9 m. From 178 m to approximately 291 m the rock is still strongly sheared but alteration is mainly weaker kaolinite-sericite-carbonate-pyrite and volcaniclastic textures are locally visible. From 291 m to the end of hole at 437.7 m the hole is more competent green to greenish- grey, weakly chlorite-epidote altered volcaniclastic rocks of the Upper Triassic Mosley Formation. Anomalous Cu intervals occur between 150.50-187.17 m and 259.24-268.87 m returning 120 and 127 ppm Cu respectively. The targeting campaign by Ethos going forward includes additional evaluation of geochemical and alteration data as well as re-interpretation of geophysical datasets in light of the new drill hole contributions to the model. Logging, geochemical and spectral SWIR analysis of the drill core suggest several key geological interpretations that require follow up: The variety of alteration assemblages defined in the drill core suggest differing erosion levels at Perk-Rocky. The dimensions of the alteration footprint have been extended significantly to depth. Pyrophyllite was encountered in all drill holes except PK21-05. The QSP + AA footprint now measures approximately 5,000 m by 600 m by >200 m while the AA alteration within the QSP has been identified over an area approximately 3,500 m by 600 m by 200 m vertically. Pyrophyllite was encountered in all drill holes except PK21-05. The QSP and AA altered geological units occur within moderate south dipping panels which are bound by low-angle faults.