Dynacor Gold Mines Inc. reported that it has received community approval to drill test the disseminated zone of its gold project, Tumipampa. Dynacor will now apply for the exploration permit from the Ministry of Energy and Mines. The Corporation is preparing a drilling campaign of the high priority targets immediately after the rainy season. The company also released significant surface results obtained in the disseminated gold zone at Tumipampa during Q3-2017. The mineralogy of the samples was studied using a spectroradiometer and photomicrography. Exploration Highlights: Gold: 25% of the 104 surface channel samples had anomalous Au grades above 0.05 g/t or (0.05 ppm), ranging from 0.05 to 16.52 g/t; Silver: 28.8% of the 104 surface channel samples had anomalous Ag grades above 1.5 g/t (1.5 ppm), ranging from 1.5 to 268 g/t; Copper: 26.9 % of the 104 surface channel samples had Cu grades above 100 ppm, ranging from 100 to 762 ppm; Molybdenum: 22.1% of the 104 samples had Mo grades above 5 ppm, ranging from 5 to 66.6 ppm; Lead: 11.5% of the 104 samples had Pb grades above 250 ppm, ranging from 250 to 3719 ppm; and Free gold particles: high definition photomicrography revealed the presence of free gold grains in a highly altered epithermal matrix within the quartzites. Surface Sampling: During third quarter of 2017, a surface sampling campaign was undertaken targeting the Sumac brecciated zone which is 600 meters long and 300 meters wide and is located in the south-east of the disseminated gold zone at Tumipampa.