GOLD STAR DRILLING
Drill hole GS-22-06 on the Goldilocks discovery intersected significant intervals of sulphide mineralization including a 5.8 m mineralized interval from 165.5 m to 171.3 m containing stringers and aggregations of pyrite and chalcopyrite (Photo 1) and a 20 cm vein with chalcopyrite at 138 m (Photo 2). The mineralized intervals consist of sulphides occurring within shear-hosted massive quartz veins surrounded by strongly foliated quartz-chlorite schist hosted in a sequence of alternating granodiorite and andesite units. (Photo 3)
The 2022 drill program successfully extended the footprint of the Goldilocks zone by 120 m along strike to a total of 410 m with 160 m of vertical relief and 90 meters of down-dip extent. The most significant drill intercept (5.8 m of stringers and aggregations of sulphides within shear-hosted quartz veins) observed in hole GS-22-06 drilled towards the East-Northeast suggests that the system is most prominent in that direction. Mineralized intervals drilled during the 2022 drill campaign contain the same style of textures and mineralization as hole GS-22-05 reported in 2021 that intersected 10.795 gpt Au (14.31 AuEq) over 5.5 m including 29.2 gpt Au (38.37 AuEq) over 2.0 m.
The Gold Star Property is an original discovery with no previous recorded work in the area and is situated 4.5 km east of tidewater along the
100 % CONTROLLED BINGO PROPERTY LOCATED IN THE GOLDEN TRIANGLE WITHIN THE ESKAY RIFT - 2022 PROGRAM WAS SUCCESSFUL IN IDENTIFING MULTIPLE NEW TARGETS
The Company has conducted initial exploration work on the Bingo property focussed on adding to existing targets for the planned maiden drill campaign. The Bingo Main zone is an original drill ready discovery containing gold mineralized grab, chip and channel samples over an area of 420 metres x 320. The zone is open both on strike and to depth. Multiple holes are planned over a strike length of 550 m.
Historic highlights of the Bingo property include:
- 83% of all the samples taken contained gold mineralization
- Historical channel cut over 4.85 metres assayed 1.77 gpt Au, and 0.20 % Cu Drill ready
- Historical channel cut over 3.2 metres assayed 1.48 gpt Au and 0.37 % Cu Drill ready
- Between 2016 and 2018, 19 chips samples were collected and assayed up to 9.79 gpt Au and 18 grab samples that returned assay values up to 1.22 gpt Au
- Bingo presentation
The program on the Bingo property identified 18 new targets that were sampled and mapped and are drill ready, assays pending (Map 2; Photo 4; Photo 5; Photo 6). A total of 15 channel and 13 grab samples were collected over 300 m on a newly identified mineralized shear zone (Map 3) and 55 grab samples and 13 Bulk Leach Extractable Gold (BLEG) samples were collected on the rest of the property. In addition, a ground magnetic survey over an area of 500 m by 750 m (15 line-kilometers; Map 4) and a soil sampling grid consisting of 362 samples covering an area of 1250 m by 750 m (soil grid with 50 m spacing) were performed. A high-resolution drone mapping program is planned to be completed on or before
COMMENCEMENT OF WORK ON MIDAS
The Company’s field crew has commenced work on the Midas property, where it will prospect and map with the goal of expanding the known footprint of the Kokomo discovery in preparation for the planned maiden drilling. The Kokomo showing is a newly discovered Eskay-style Volcanic-Hosted Massive Sulphide (VHMS) target 5 m wide and 30 m along strike where a 1 m chip sample assayed 9.343 gpt Au, 117 gpt Ag, 1.58 % Cu and 1.77 % Zn that remains open in all directions (Photo 7). The same or similar lithology extends from the Kokomo discovery along strike for several hundred meters and remains to be mapped and sampled. Recently processed Induced Polarization (IP) 3D inversion returned chargeability and resistivity anomalies coincident with the Kokomo showing that extend for up to 350 m along strike and 200 m to depth (Photo 8). The Kokomo showing was discovered 700 m upslope in the drainage where a Bulk Leach Extractable Gold (BLEG) sample assayed 29 ppb Au, 613 ppb Ag, 137 ppm Cu, 54.4 ppm Pb and 462 ppm Zn, by far the highest BLEG sample on the property (Map 5).
Qualified Person
Other
Oriented HQ-diameter diamond drill core from the drill campaign is placed in core boxes by the drill crew contracted by the Company. Core boxes are transported by helicopter to the staging area, and then transported by truck to the core shack. The core is then re-orientated, meterage blocks are checked, meter marks are labelled, Recovery and RQD measurements taken, and primary bedding and secondary structural features including veins, dykes, cleavage, and shears are noted and measured. The core is then described and transcribed in MX DepositTM. Drill holes were planned using Leapfrog GeoTM and QGISTM software and data from the 2017-2019 exploration campaigns. Drill core containing quartz, chlorite-schist, sulphide(s), or notable alteration are sampled in lengths of 0.5 to 1.0 meters. Core samples are cut lengthwise in half, one-half remains in the box and the other half is inserted in a clean plastic bag with a sample tag. Standards, blanks and duplicates were added in the sample stream at a rate of 20%.
Grab, channels, chip and talus samples were collected by foot with helicopter assistance. Prospective areas included, but were not limited to, proximity to MINFile locations, placer creek occurrences, regional soil anomalies, and potential gossans based on high-resolution satellite imagery. The rock grab and chip samples were extracted using a rock hammer, or hammer and chisel to expose fresh surfaces and to liberate a sample of anywhere between 0.5 to 5.0 kilograms. All sample sites were flagged with biodegradable flagging tape and marked with the sample number. All sample sites were recorded using hand-held GPS units (accuracy 3-10 meters) and sample ID, easting, northing, elevation, type of sample (outcrop, subcrop, float, talus, chip, grab, etc.) and a description of the rock were recorded on all-weather paper. Samples were then inserted in a clean plastic bag with a sample tag for transport and shipping to the geochemistry lab. QA/QC samples including blanks, standards, and duplicate samples were inserted regularly into the sample sequence at a rate of 10%.
All samples, including core, rock grabs, channels, and talus samples, are transported in rice bags sealed with numbered security tags. A transport company takes them from the core shack to the ALS labs facilities in
The reader is cautioned that grab samples are spot samples which are typically, but not exclusively, constrained to mineralization. Grab samples are selective in nature and collected to determine the presence or absence of mineralization and are not intended to be representative of the material sampled.
For more information, please contact:
President and Chief Executive Officer
(604)-559-8028
www.juggernautexploration.com
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE
FORWARD LOOKING STATEMENT
Certain disclosure in this release may constitute forward-looking statements that are subject to numerous risks and uncertainties relating to Juggernaut’s operations that may cause future results to differ materially from those expressed or implied by those forward-looking statements, including its ability to complete the contemplated private placement. Readers are cautioned not to place undue reliance on these statements. NOT FOR DISSEMINATION IN
![](https://ml.globenewswire.com/media/ODU0MWVlOTEtM2Y4OS00YmE0LWIwZTQtNGM0NDllMGFkNjQwLTEwOTk0OTY=/tiny/Juggernaut-Exploration-Ltd.png)
2022 GlobeNewswire, Inc., source