Denison carried out the Program in collaboration with Orano Canada Inc. ("Orano Canada"), as operator and owner of 74.83% of the Midwest Joint Venture ("MWJV"). Midwest is located approximately 25 kilometres, by existing roads, from the Denison-Orano Canada owned McClean Lake Operation (see Figure 1), which is currently processing ore for the
The Program achieved its planned objectives, and the results provide preliminary validation that the Midwest Main deposit possesses the characteristics necessary for an ISR operation. Accordingly, further evaluation is warranted and, building on the Concept Study and incorporating the data acquired in the test program, we are proceeding with a Preliminary Economic Assessment ("PEA") for ISR mining. Midwest represents Denison's third project evaluated for potential ISR mining in the
Highlights from the Program include the following:
- Confirmed Hydraulic Conductivity: Pump and injection tests validated hydraulic connectivity in the test wells within the mineralized zone and achieved hydraulic conductivity values (a measure of permeability) consistent with the Concept Study. Sufficient permeability within the mineralized zone is a key criterion for the successful deployment of the ISR mining method.
- Demonstrated the Effectiveness of Permeability Enhancement: One method of permeability enhancement was successfully deployed within two wells, demonstrating the suitability of the method to the Midwest Main deposit. Efficiency of permeability enhancement was verified by comparison of pre- and post-permeability enhancement hydraulic testing.
- Metallurgical Samples Defined and Collected for Leaching Characteristics: Core samples representative of the Midwest deposit were collected during the Program for use in future metallurgical tests to determine the leaching characteristics.
The 2024 ISR field test program was designed to validate various deposit-specific characteristics of the Midwest Main deposit, and to collect a database of geotechnical, hydrogeological, and metallurgical data to further evaluate the ISR mining conditions present at the deposit.
Ten small-diameter test wells were installed within the Midwest Main deposit during the Program – including a 4-well test pattern (the "Test Pattern") and 6 individual wells to test specific areas of the deposit for various characteristics. The Test Pattern included one injection well, one extraction well, a recharge well, and a monitoring well outfitted with a multi-channel vibrating wire piezometer. The six additional wells were drilled to their target depths and, as applicable, outfitted with well screens and/or pressure monitoring devices to facilitate hydrogeological testing. All wells were decommissioned at conclusion of the Program consistent with regulatory commitments. See Figures 2 and 3 for an illustration of the well locations within the northeast portion of the Midwest Main deposit.
Core collected from the test wells within the mineralized zone is also expected to be used to verify and update the current mineral resource estimate for the deposit and support future wellfield design and mineral processing assessments.
The Program included the completion of various pump, injection, and packer tests designed to assess the permeability of the Midwest Main deposit.
The test program measured pressure changes within the mineralized zone, which provides evidence of the deposit's hydraulic conditions and is indicative of the potential for the movement of mining solution in an ISR mining operation. Sufficient permeability within the mineralized zone is a key criterion for the successful deployment of the ISR mining method.
The results from the hydrogeological testing at Midwest Main produced hydraulic conductivity values that are consistent with those assumed in the Concept Study.
Additional supportive test work completed during the Program included permeability and porosity tests conducted either downhole or on mineralized drill core recovered during the test program.
One method of permeability enhancement was successfully evaluated on two test wells within the mineralized zone, with efficacy verified by the comparison of pre- and post-permeability enhancement hydraulic conductivity tests. Permeability enhancement has been demonstrated to increase and normalize hydraulic conductivity in the area proximal to the wellbore, allowing for increased contact of injected fluids within the mineralized zone in order to maximize uranium recoveries in an ISR mining environment.
In addition to the tests described above, data and samples were collected from the drill core recovered from the test wells to facilitate: (1) the assessment of matrix permeability, to inform an initial model of the hydrogeological variations of the deposit; (2) geotechnical evaluations; (3) sediment analysis using Standard Penetration Test ("SPT") for measuring mud depths and the overburden below lake bottom; and (4) testing of compressive and tensile strength for incorporation into future geotechnical assessments.
Midwest is situated in the eastern portion of the Athabasca Basin region in northern
Initial exploration work at Midwest began in 1966, and Denison first became an owner of the project in 1987. In 2007,
The MWJV is currently evaluating the viability of a number of potential options for the future development of the Midwest Main deposit, including ISR. Even if a mining method is selected, any future development by the MWJV will be subject to various review and approval processes, including MWJV approval processes, provincial and federal regulatory review, and engagement.
Denison is a uranium mining, exploration and development company with interests focused in the
Denison's interests in
Additionally, through its 50% ownership of
In 2024, Denison is celebrating its 70th year in uranium mining, exploration, and development, which began in 1954 with Denison's first acquisition of mining claims in the
The disclosure of scientific or technical information contained in this release has been reviewed and approved, as applicable, by Mr. Chad Sorba,
Certain information contained in this news release constitutes 'forward-looking information', within the meaning of the applicable
In particular, this news release contains forward-looking information pertaining to the following: scope, objectives and interpreted results of the ISR test program; future plans and objectives for Midwest, including further studies, analysis and a potential future resource estimate update and PEA; and expectations regarding its joint venture ownership interests and the continuity of its agreements with its partners and third parties.
Forward looking statements are based on the opinions and estimates of management as of the date such statements are made, and they are subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of Denison to be materially different from those expressed or implied by such forward-looking statements. For example, the modelling and assumptions upon which the plans for Midwest are based may not be maintained after further work is completed. In addition, Denison may decide or otherwise be required to discontinue testing, evaluation and other work if it is unable to maintain or otherwise secure the necessary resources (such as testing facilities, capital funding, joint venture approvals, regulatory approvals, etc.). Denison believes that the expectations reflected in this forward-looking information are reasonable but no assurance can be given that these expectations will prove to be accurate and results may differ materially from those anticipated in this forward-looking information. For a discussion in respect of risks and other factors that could influence forward-looking events, please refer to the factors discussed in Denison's Annual Information Form dated
Accordingly, readers should not place undue reliance on forward-looking statements. The forward-looking information contained in this news release is expressly qualified by this cautionary statement. Any forward-looking information and the assumptions made with respect thereto speaks only as of the date of this news release. Denison does not undertake any obligation to publicly update or revise any forward-looking information after the date of this news release to conform such information to actual results or to changes in Denison's expectations except as otherwise required by applicable legislation.
View original content to download multimedia:https://www.prnewswire.com/news-releases/denison-announces-completion-of--inaugural-isr-field-test-program-at-midwest-302161661.html
SOURCE
© Canada Newswire, source