(Delivering the non-woven fabric tape)
Product Introduction
The non-woven fabric tape is made of synthetic fibers as the raw material, in which the fiber webs of synthetic fibers are bonded and reinforced, then into non-woven fabric tape.
The non-woven fabric tape is widely used in the wire and cable industry. It can be used as the isolation layer, cushion layer and thermal protective layer for medium and low voltage power cables, rubber cables, control cables, communication cables and other types of cables and communication optical cables. During the cable processing, it can help to fix the cable core and ensure the separation within the extruded layers. It can also increase the mechanical strength and flexibility of optical cables and power cables.
The polyester thin non-woven fabric tape
The non-woven fabric tapes
1) The surface is flat, without wrinkles, notches, flashes, holes and other defects;
2) Good uniformity, no delamination;
3) Light weight, thin thickness and good flexibility;
4) High mechanical strength, easy for wrapping and longitudinal wrapping processing;
5) Good heat resistance, high instant temperature resistance, and the cable can maintain stable performance at instant high temperatures;
6) High chemical stability, no corrosive components, resistant to bacteria and mold erosion.
Technical Parameters
Storage Method
1) The product should be stored in a clean, hygienic, dry, and ventilated warehouse. It should not be stacked with flammable products and strong oxidants, and should not be near the fire source;
2) The product should avoid direct sunlight and rain;
3) The product should be packaged intact, avoid dampness and contamination;
4) The product should be protected from heavy pressure, beating, and other mechanical damage during storage and transportation
Media Contact
Company
Email: sales@owcable.com
Phone: 0086-15162145573
Country:
Website: https://www.owcable.com/
Source: www.abnewswire.com
.
(C) 2021 M2 COMMUNICATIONS, source