CopperCorp Resources Inc. reported new assay results from two diamond drill holes at the Alpine prospect, part of its 100%-owned, 1,066 km2 AMC Copper Project located on a paved road approximately 30km from the regional hub of Zeehan, West Tasmania, Australia. AP035, drilled to 447.8m total length, was designed to test down-dip extensions to mineralization encountered in hole AP0243 (including 42.1m @ 0.60% Cu from 55.9m, 6m @ 0.96% Cu from 133m, and 43m @ 0.33% Cu from 157m3). AP035 successfully intercepted two zones of copper mineralization, including 45.0m @ 0.62% Cu from 217.0m (including 18.0m @ 0.9% Cu from 238.0m), and 22.0m @ 0.15% Cu from 409.0m.

The upper mineralization zone from 217m consists of variably chalcopyrite mineralized ironstone (magnetite-pyrite-hematite-siderite) zones at 217.2 to 232.5m and 241.5 to 255.4m depth down hole, while the low-grade intercept from 409m is associated with disseminated, blebby and stringer vein style chalcopyrite mineralization zones and quartz-siderite alteration and veining to 430.7m downhole. AP035 was terminated due to technical issues associated with a +5m wide graphitic shear zone from 442.4m. AP036 drilled to 600.1m total length, was designed to test for possible northeast strike extensions to the Alpine Stellar zone mineralization at depth below hole AP0306 (26.2m @ 0.53% Cu from 85.8m, 37.0m @ 0.57% Cu from 181.0m including a high-grade zone of 10.0m @ 1.2% Cu from 185.0m, 8.0m @ 0.25% Cu from 240m, and 18.0 @ 0.70% Cu from 307.0m including a high-grade zone of 4.9m @ 1.5% Cu from 312.1m).

AP036 successfully intercepted two zones of copper mineralization, including 90.0m @ 0.50% Cu from 334.0m (including 23.0m @ 1.14% Cu from 292.0m), and 64.0m @ 0.28% Cu from 465.0m. Mineralization occurs as variable intensity (trace to moderate) disseminated, blebby and vein style chalcopyrite associated with quartz-siderite alteration and veining from 334.8m, with zones of chalcopyrite mineralized ironstone (magnetite-pyrite-hematite-siderite) at 336.8 to 341m and 394.3 to 415.2m down hole. Alpine Drill Program Overview The Company's maiden drill program at Alpine has focused on infill and extension drilling with a focus to vector towards zones of thicker and higher-grade mineralization at the Alpine Stellar zone, and step-out drilling to test the high-priority target at the Alpine West zone.

A total of 17 holes have been completed to date. The results of 13 CopperCorp drill holes (AP022 to AP034) and 21 historical drill holes (AP001 to AP021) from the Alpine Stellar zone have been previously reported, with best significant intercepts from these and newly reported results (this release) including: AP004: 38.2m @ 0.79% Cu from 57.7m, including 28.2m @ 1.03% Cu from 58.7m AP007: 86.0m @ 0.50% Cu from 62.0m, including 15.7m @ 0.82% Cu from 127.0m AP017: 24.7m @ 0.52% Cu from 222.0m AP022: 43.0m @ 0.62% Cu from 135.0m, including 17.4m @ 0.74% Cu from 159.7m AP024: 42.1m @ 0.60% Cu from 55.9m, including 21.0m @ 0.76% Cu from 73.0m, and AP024: 6.0m @ 0.96% Cu from 133.0m AP025: 18.3m @ 0.59% Cu from 147.0m AP027A: 54.2m @ 0.49% Cu from 34m, including 11.0m @ 0.79% Cu from 61.0m, and 106.0m @ 0.31% Cu from 158m AP030: 37.0m @ 0.57% Cu from 181.0m, including 10.0m @ 1.20% Cu from 185.0m, and AP030: 18.0m @ 0.70% Cu from 307.0m, including 4.9m @ 1.50% Cu from 312.1m AP033: 32.5m @ 0.59% Cu from 270.5m, and 10.5m @ 0.75% Cu from 419.0m to EOH AP034: 31.6m @ 0.64% Cu from 177.7m, including 5.0m @ 2.06% Cu from 187.0m AP035: 45.0m @ 0.62% Cu from 217.0m, including 18.0m @ 0.90% Cu from 238m AP036: 92.0m @ 0.50% Cu from 334.0m, including 23.0m @ 1.14% Cu from 393m Interpretation of the project geology to date suggests that the best high-grade copper zones at the Alpine Stellar zone are associated with chalcopyrite mineralization in structurally controlled breccia zones overprinting magnetite-hematite-pyrite ironstone units and in brittle fracture vein and breccia networks overprinting intensely silica-albite altered metasediment host rock. The Company has commenced a geological review towards refining the Alpine geological model with a particular focus on the high-grade zones that will form the basis for targeting the next round of drilling at Alpine.

Drilling at Alpine West2 (Figure 1) is ongoing with the first hole at the Alpine West target, AP037, completed to a depth of 548.5m targeting magnetic and soil geochemical anomalies. Logging, processing, and sampling of AP037 has been completed prior and samples submitted to the lab. A second hole, AP038, was recently commenced at Alpine West targeting gravity and soil geochemical anomalies.